home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 1
/
Cream of the Crop 1.iso
/
PROGRAM
/
CLJNC824.ARJ
/
README.1ST
< prev
next >
Wrap
Text File
|
1992-03-18
|
11KB
|
272 lines
CALC_JNC ver 8.24 is a fully functional SHAREWARE calculator program.
"This program is produced by a member of the Association of
Shareware Professionals (ASP). ASP wants to make sure that the
shareware principle works for you. If you are unable to resolve
a shareware-related problem with an ASP member by contacting the
member directly, ASP may be able to help. The ASP Ombudsman can
help you resolve a dispute or problem with an ASP member, but
does not provide technical support for members' products. Please
write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI
49442 or send a CompuServe message via CompuServe Mail to ASP
Ombudsman 70007,3536."
This program has all of is functions enabled. When registration
is received a PRINTED MANUAL along with the following programs
will be sent to you :
CALC_JNC - Registered version
CALC_HEX - 22k PROGRAMMERS CALCULATOR
CALC_CP - Uses math coprocessor for floating point
MANUAL - Full users manual
Customer support (phone,mail,email) will also be available to
all registered users.
At the end of this file are the functions which are available
in this program. The printed manual contains full examples
for each function.
If you have any problems with this SHAREWARE program please
contact me via E-Mail or U.S. Mail.
DEFINITION OF SHAREWARE
Shareware distribution gives users a chance to try software
before buying it. If you try a Shareware program and continue
using it, you are expected to register. Individual programs
differ on details -- some request registration while others
require it, some specify a maximum trial period. With
registration, you get anything from the simple right to continue
using the software to an updated program with printed manual.
Copyright laws apply to both Shareware and commercial software,
and the copyright holder retains all rights, with a few specific
exceptions as stated below. Shareware authors are accomplished
programmers, just like commercial authors, and the programs are
of comparable quality. (In both cases, there are good programs
and bad ones!) The main difference is in the method of
distribution. The author specifically grants the right to copy
and distribute the software, either to all and sundry or to a
specific group. For example, some authors require written
permission before a commercial disk vendor may copy their
Shareware.
Shareware is a distribution method, not a type of software. You
should find software that suits your needs and pocketbook,
whether it's commercial or Shareware. The Shareware system makes
fitting your needs easier, because you can try before you buy.
And because the overhead is low, prices are low also. Shareware
has the ultimate money-back guarantee -- if you don't use the
product, you don't pay for it.
DISCLAIMER - AGREEMENT
Users of CALC_JNC must accept this disclaimer of warranty:
CALC_JNC is supplied as is. The author disclaims all
warranties, expressed or implied, including, without limitation,
the warranties of merchantability and of fitness for any purpose.
The author assumes no liability for damages, direct or conse-
quential, which may result from the use of CALC_JNC."
CALC_JNC is a "shareware program" and is provided at no charge
to the user for evaluation. Feel free to share it with your
friends, but please do not give it away altered or as part of
another system. The essence of "user-supported" software is to
provide personal computer users with quality software without
high prices, and yet to provide incentive for programmers to
continue to develop new products. If you find this program
useful and find that you are using CALC_JNC and continue to use
CALC_JNC after a reasonable trial period, you must make a reg-
istration payment of $25.00 to James N. Cox. The $25.00
registration fee will license one copy for use on any one
computer at any one time. You must treat this software just like
a book. An example is that this software may be used by any
number of people and may be freely moved from one computer
location to another, so long as there is no possibility of it
being used at one location while it's being used at another.
Just as a book cannot be read by two different persons at the
same time.
Commercial users of CALC_JNC must register and pay for their
copies of CALC_JNC within 30 days of first use or their license
is withdrawn. Site-License arrangements may be made by con-
tacting James N. Cox.
Anyone distributing CALC_JNC for any kind of remuneration must
first contact James N. Cox at the address below for authorization.
This authorization will be automatically granted to distributors
recognized by the (ASP) as adhering to its guidelines for
shareware distributors, and such distributors may begin offering
CALC_JNC immediately (However James N. Cox must still be advised so
that the distributor can be kept up-to-date with the latest
version of CALC_JNC.).
You are encouraged to pass a copy of CALC_JNC along to your
friends for evaluation. Please encourage them to register their
copy if they find that they can use it. All registered users
will receive a copy of the latest version of the CALC_JNC
system.
James N. Cox
418 Erie Avenue
Quakertown, Pa. 18951 U.S.A
CIS# 76665,3443
COMMAND LINE OPTIONS
────────────────────
usage :
CALC_JNC {/r} {/bn} {/fn} {/hn} {/pn} {/x}
PARAMETER DEFINITION
───────── ───────────────────────────────────────────
/r ─────────────> Load the calculator as a TSR.
/bn ─────────────> Set the background color. (see color table)
Range : n <= 15.
/fn ─────────────> Set the foreground color. (see color table)
Range : n <= 15.
/hn ─────────────> Define a new hot key to activate the
calculator program when loaded as a TSR.
Range : n = any key.
/i ─────────────> Information about the program.
/pn ─────────────> Set the number of fixed decimal places.
Range : 0 >= n <= 9
/x ─────────────> Use the float calculator as the initial
calculator
/? ─────────────> Show options.
The above options except for /i and /? are only valid the
first time CALC_JNC is loaded as a TSR. If CALC_JNC is not
loaded as a TSR then the command line options are always valid.
PROGRAMMERS CALCULATOR
────────────────────────
Programmers Functions
───────────────────────
+ : Addition
─ : Subtraction
* : Multiplication
/ : Division
% : Modulus
ALT-D : Nand
ALT-A : And
ALT-O : Or
ALT-X : Exclusive-Or
ALT-R : Nor
ALT-N : Not
ALT-E : Negation
ALT-S : Store result in memory location that
follows.
ALT-L : Recall the value stored in the location
follows.
ALT-F : Switch to the FLOAT CALCULATOR.
ALT-K : Send result to keyboard buffer
ALT-H : Help screens.
TAB : Clear entry line.
BACKSPACE : Delete last character entered.
ESC : Exit CALC_jnc and return to the
application.
FLOAT CALCULATOR
──────────────────
Float Functions
─────────────────
+ : Perform addition.
- : Perform subtraction.
* : Perform multiplication.
/ : Perform division.
() : Parenthesis.
Max depth of 15.
x ^ y : x raised to the power of y
x , y : Obtain the xth root of x.
x ] : Obtain the reciprocal of x.
sqr(arg) : Perform square root on arg.
abs(arg) : Get the absolute value of arg.
sin(arg) : Perform sine function on arg.
cos(arg) : Perform cosine function on arg.
tan(arg) : Perform tangent function on arg.
sinh(arg) : Perform the hyperbolic sine of arg.
cosh(arg) : Perform the hyperbolic cosine of arg.
tanh(arg) : Perform the hyperbolic tangent of arg.
asin(arg) : Perform the arc sine of arg.
acos(arg) : Perform the arc cosine of arg.
atan(arg) : Perform the arc tangent of arg.
ln(arg) : Perform the natural logarithm of arg.
log(arg) : Perform the common logarithm of arg.
exp(arg) : Perform the anti-natural logarithm of arg.
int(arg) : Convert arg to an integer.
frac(arg) : Get the fraction of arg.
fact(arg) : Get the factorial of arg.
cube(arg) : Get the cube root of arg.
sav(arg) : Save the result to the left of the function
in arg. This function may be put into a formula
in any place.
Range : 0 to 9 memories.
rec(arg) : Recall memory at location arg. This function
may be put into a formula in any place.
Range : 0 to 9 memories.
back(arg) : Define the background color.
fore(arg) : Define the foreground color.
ALT-P : Put the previous result on the entry line.
ALT-D : Recall the previous formula entered.
ALT-U : Recall the next formula entered.
(use in conjunction with ALT-D)
ALT-F : Switch to the PROGRAMMERS CALCULATOR.
ALT-K : Send result to keyboard buffer
ALT-H : Help screens.
TAB : Clear entry line.
BACKSPACE : Delete last character entered.
ESC : Exit CALC_JNC and return to the application.